磚瓦泛霜箱是**檢測儀器，適用于燒結普通磚、燒結多孔磚、空心磚和空心砌塊磚、燒結粘土磚、免燒磚、粉煤灰磚、爐 渣磚和碳化磚等的泛霜試驗。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。
Brick tile frost box is a testing instrument, suitable for frosting of sintered ordinary bricks, sintered porous bricks, hollow bricks and hollow block bricks, sintered clay bricks, non-fired bricks, fly ash bricks, slag bricks and carbonized bricks. test. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.
磚瓦泛霜試驗箱按照GB5101—2003關于磚瓦泛霜試驗要求而設計制造的，由上海榮計達儀器科技有限公司提供,能自動控制箱體內的溫度，是磚瓦生產、施工、試驗單位檢測產品質量的設備之一。設備質保期一年，一年內產品如有質量問題，供方負責免費維修。如果因操作不當或者人為損壞，我公司亦應提供維修、更換服務，由此產生的費用我公司會酌情收取。
The brick and tile frost test box is designed and manufactured in accordance with GB5101-2003 requirements for brick and tile frost test. It is provided by Shanghai Rongjida Instrument Technology Co., Ltd. It can automatically control the temperature inside the box. It is a unit for tile production, construction, and testing. One of the equipments to check product quality. The warranty period of the equipment is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged as appropriate.
磚瓦泛霜箱技術指標：
■控制溫度：室溫—32℃
■箱體容積：100L
■加熱功率：0.6KW
■試件數量：10塊
■電源電壓：220V±10%
■容積：400X920X380mm
Technical index of brick frost box:
■ Control temperature: room temperature—32 ℃
■ Box volume: 100L
■ Heating power: 0.6KW
■ Number of test pieces: 10 pieces
■ Power supply voltage: 220V ± 10%
■ Volume: 400X920X380mm
磚瓦泛霜箱操作規程：
■ 將實驗組的磚樣分別直立于5個淺盤中，往前盤中注入水面高度不低于20mm的蒸餾水，用有機玻璃或塑料薄膜覆蓋在淺盤上，并將磚樣通過有機玻璃或塑料薄膜上留有的長方形孔暴露在外面，記錄時間。
■磚樣浸在盤中的時間為7天。開始1~2天內經常加水以保持盤內水面的高度。在這7天內要求室內溫度控制在16~32℃，相對濕度為30~70%。
■ 7天后將試驗組和對照組磚樣同時放入烘箱內，溫度恒定在110~115℃，連續干燥24小時后取出冷卻到常溫，檢查并記錄泛霜程度。
Brick and tile frost box operation rules:
■ Put the brick samples of the experimental group upright in 5 shallow pans, inject distilled water with a water level of not less than 20mm into the front pan, cover the shallow pans with plexiglass or plastic film, and pass the bricks through the plexiglass or The rectangular hole left on the plastic film is exposed to the outside and the time is recorded.
■ The brick sample is immersed in the dish for 7 days. Add water frequently for the first 1-2 days to keep the water level in the pan. In these 7 days, the indoor temperature should be controlled at 16 ~ 32 ℃, and the relative humidity should be 30 ~ 70%.
■ After 7 days, put the bricks of the test group and the control group into the oven at the same time, the temperature is constant at 110 ~ 115 ℃, and after taking 24 hours of continuous drying, take out and cool to normal temperature, check and record the degree of frost.
磚瓦泛霜箱使用說明：
■將未浸過水的10塊磚樣分成五對，每對磚的敲擊聲音相近，顏色相近，外觀基本一致。
■再從每對磚樣中取出一塊，共五塊，按順序編號作為實驗組。
■另外五塊作為對照組，也按同樣順序編號。
■用毛刷把粘附在磚樣上的粉塵刷掉，然后把這十塊磚樣放在110~115℃的烘箱內烘干到恒重，將磚樣取出盛放在泛霜試驗箱內冷卻到常溫即可開始試驗。
Instructions for brick tile frost box:
■ Divide 10 unsaturated brick samples into five pairs. The striking sound of each pair is similar, the colors are similar, and the appearance is basically the same.
■ Take one more piece from each pair of brick samples, a total of five pieces, and number them in order as the experimental group.
■ The other five blocks are used as control groups, and they are numbered in the same order.
■ Brush off the dust adhering to the brick samples with a brush, then dry these ten brick samples in an oven at 110 ~ 115 ° C to constant weight, take out the brick samples and place them in the frost test box. The test can be started by cooling to normal temperature.
磚瓦泛霜箱注意事項：
■每次使用后，應洗凈擦干。
■非試驗人員不得使用本儀器。
3. 試驗在進行過程中不得離開或與人閑談。
4.應放置在無塵、無腐蝕常溫的環境中。
5.使用本產品前，請仔細閱讀說明書，并妥善保管好說明書
Note for brick tile frost box:
■ Wash and dry after each use.
■ Non-testers must not use this instrument.
3. Do not leave or chat with others during the test.
4. Should be placed in a dust-free, non-corrosive room temperature environment.
5. Please read the instructions carefully before using this product, and keep the instructions properly
會員1.png)
QQ:2568841715
