粘度計(表觀),發動機油表觀粘度測定器(JSH1902)
JSH1902 面議津市市石油化工儀器有限公司
津市市石油化工儀器有限公司
| 參 考 價 | 面議 |
產品型號JSH1902
品 牌
廠商性質其他
所 在 地
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-08-05 13:10:28瀏覽次數：336次
聯系我時，請告知來自 紡織服裝機械網產品型號：JSH1902產品名稱：粘度計(表觀)
產品型號：JSH1902
產品名稱：粘度計(表觀),發動機油表觀粘度測定器(JSH1902)
產品說明：
JSH1902發動機油表觀粘度測定器（冷啟動模擬機法）
一、符合GB/T6538、ASTMD5293標準
二、主要技術參數
控溫范圍： -35～0℃(-35℃只在≤25℃室溫環境)
控溫方式： 進口數顯溫控儀控溫
試驗控制：單片機控制自動計時、自動控制冷泵和電機的運轉，根據測得的轉速自動計算出試樣的粘度。
功 率： 1KW
工作電源： AC220V±10﹪ 50Hz
外形尺寸：主機 245×450×430=長×寬×高(mm)
冷啟動模擬器 200×280×320=長×寬×高(mm)
冷浴尺寸： 385×600×800＝長×寬×高（mm）
三、性能及特點
1、本儀器采用進口溫控儀控溫，控溫精度高，溫度穩定。
2、本儀器冷浴采用壓縮機制冷，制冷量大，冷浴容積大，在試驗過程中，冷浴溫度波動小，可連續試驗。
3、本儀器采用特殊的冷卻劑流動方式，使定子冷卻。在25℃室溫下，對試驗溫度低到-20℃的試樣，能在30～60秒內達到控制溫度，對試驗溫度低到-30℃的試樣，能在60～90秒內達到控制溫度。
4、本儀器采用單片機控制，自動控制冷泵和電機的運轉，自動計時，自動計算和存儲結果。
5、本儀器采用觸摸屏全程操作控制，人性化設計使儀器具備操作簡單方便，易學易會易保養的特點。
6、能夠存儲每個試驗溫度的PID參數，測試時自動調用?？勺詣哟鎯?/span>100個試驗結果，循環覆蓋。
JSH1902 engine oil apparent viscosity tester (cold start simulator method)
One, in accordance with GB/T6538, ASTMD5293 standards
Ii. Main technical parameters
Temperature control range: -35 ~ 0℃(-35℃ only at ambient temperature ≤25℃)
Temperature control mode: imported digital display temperature controller
Test control: SCM control automatic timing, automatic control of the cold pump and motor operation, according to the measured speed automatically calculated the viscosity of the sample.
Power: 1 kw
Power supply: AC220V± 10% 50Hz
Dimensions: Host 245×450×430= Length × width × height (mm)
Cold start simulator 200×280×320= Length × width × height (mm)
Cold bath size: 385×600×800 = Length × width × height (mm)
Iii. Performance and Characteristics
1. The instrument adopts imported temperature controller to control temperature with high precision and stable temperature.
2. The cold bath of this instrument adopts compressor to refrigerate, with large cooling capacity and large cold bath volume. In the test process, the cold bath temperature fluctuates little and can be continuously tested.
3. The instrument adopts a special coolant flow mode to cool the stator. At room temperature of 25℃, the control temperature can be reached within 30 ~ 60 seconds for the sample with test temperature as low as -20℃, and within 60 ~ 90 seconds for the sample with test temperature as low as -30℃.
4. The instrument is controlled by single chip microcomputer, which can automatically control the operation of cold pump and motor, automatically timing, automatically calculating and storing results.
5. The instrument adopts the touch screen for the whole operation and control, and the humanized design makes the instrument simple and convenient to operate and easy to learn and maintain.
6. Can store PID parameters of each test temperature and call automatically during testing. Can automatically store 100 test results, cycle coverage.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
便攜式柴油發動機轉速表 GE-1400
GE-1400 ￥11800
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
