TBLZ600型不干膠立式智能貼標機

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2024-05-25 13:45:14瀏覽次數：168次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

  TBLZ600型不干膠立式智能貼標機

全部產品列表

暫無信息

湖南正澤智能科技有限公司

經營模式：其他

商鋪產品：1條

所在地區：

詢價 給他留言

產品簡介

TBLZ600 Self-adhesive Vertical Intelligent Labeling Machine

詳細介紹

主要用途　Main Application

　　本機主要用于口服液、安瓿、西林瓶等小圓瓶的立式自動不干膠貼標生產工序。設備搭載機器視覺識別系統，具備快速完成噴碼、檢碼、貼標、檢標、剔廢的自動一體化功能。

　　采用該設備，既提高了藥品貼標生產效率，又使貼標質量得到有效的檢測保證，貼標品控能力大幅提升。

This machine is mainly used in the production procedure of automatic vertical self-adhesive labeling of small round bottles such as oral liquid, ampoules, and vials, etc. The equipment is equipped with a machine visual identification system, which has the automatic integration function of quickly completing the coding, checking, labeling, checking and rejecting.

Using this equipment not only improves the production efficiency of labeling, but also assures the labeling quality. The control ability of labeling quality is greatly improved.

工作原理　Work Principle

　　藥瓶自進瓶緩存網帶，由螺桿分瓶送入過渡撥輪，藥瓶到達貼標撥輪某一確定位置，感應光電收到信號后，由供標伺服電機供標，此時標簽噴碼及其檢測同步進行。供標同時由壓標帶對藥瓶進行旋轉壓標。壓標完成后，由同步帶帶動藥瓶底座轉動，三臺相機陸續從不同角度，對以完成貼標藥瓶進行拍照、計算機分析，由剔瓶機構將不良品剔除，合格品進入出瓶盤，機器工序全部完成。

The medicine bottle is fed into the bottle buffering mesh belt, and the bottle is sent to the transition wheel by the separating screw. The medicine bottle reaches a certain position of the labeling wheel. After the sensor photoelectric receives the signal, the label is supplied by the labeling servo motor. The code and its detection are performed synchronously. While supplying the label, the medicine bottle is rotated and pressed by the labeling belt. After the labeling is completed, the base of the medicine bottle is driven by the synchronous belt. The three cameras successively take pictures and computer analyzes the labelled medicine bottles from different angles. The defective products are rejected by unit. The qualified products enter the outfeed tray. The machine procedures are all completed.

工作流程　Work Process

待貼標藥瓶→螺桿分瓶進瓶→貼標拔輪→光電感應→出標(噴碼、標簽噴碼檢測)→壓標→貼標檢測→出瓶(不良品自動剔除)

Medicine bottle to be labeled → Separate and infeed bottle screw → labeling wheel → photoelectric sensor → out of label (code spraying, label spray code detection) →press labeling → labeling detection → out of bottle (reject unqualified automatically)

主要技術參數　Main Technical Parameters

? 適用范圍：口服液、安瓿、西林瓶等小圓瓶

? 貼標速度：600瓶/分鐘(10ml口服液滿簽)

? 貼標精度：±0.5mm

? 檢標缺陷：噴碼不良、標簽缺失、貼標歪斜、貼皺等

? 電容量：3.5KW

? 電源：380v 50HZ

? 氣源：0.6MPa

? 工作高度：960mm

? 外形尺寸(L×W×H)：2285×2150×1800(mm)

? 凈重：800Kg

? Scope of application: small round bottles such as oral liquid, ampoules, and vials, etc.